Assembly Of The Side Rail Sr2 On Residential Care Beds - Hermann Bock SR2 Instrucciones De Uso Y Montaje

EN
2.5

Assembly of the side rail SR2 on residential care beds

Move the nursing care bed to the highest posi-
tion for easier assembly.
Holes are provided on the longitudinal frame of
the nursing care bed for the side rails. These are
sealed with plastic plugs, please remove these
plastic plugs.
The brackets are now mounted on the longitudi-
nal frame. Note that the lower, larger hole faces
outward.
To do this, take the bracket as shown and fix it by
inserting the M8x60mm screw through the com-
ponent and the frame and tighten it.
The attachment bolt is now pushed through the
side rail SR2, with the attachment pointing out-
wards.
Then slide the spacer over the bolt from the in-
ner side.
The side rail SR2 is now pushed into the lower,
larger hole with the bolt as far as it will go.
10