Custom Programs; Body Fat Measurement - CS Compact Space X Manual Del Usuario

CUSTOM PROGRAMS

The USER mode contains the three programs U1-U3. In USER mode, the user
can call up or set his own unique movement program. Press the P button to
set U1-U3.
To program U1-U3
• Press the MODE button to set the speed of each segment. Use the
+/- button or the speed buttons 3/6/10 to set the desired speed of the
corresponding segment. After setting the current number, press the
MODE button again to set the speed for the next segment. The set values
are automatically stored when the last parameter is set.
• The next time you enter Custom Mode, select one of the stored programs
and start it by pressing START.

BODY FAT MEASUREMENT

Note: The Body Mass Index (FAT) is a measure of a person's height and
weight, not the fat content of the body. This data is for sports reference
only, it cannot be used as medical data.
When the Treadmill turns on, press the P button to select FAT and open the
Body Fat Meter. Press the MODE button to select the item serial number. Then
press the +/- button to set the following parameters:
• F1 = gender (1 = male / 2 = female). Default setting is [1].
• F2 = age (10-99). The default setting is [25].
• F4, = height (100-200 cm). The default setting is [170] cm.
• F3, = weight (20-150 kg). The default setting is [70] kg.
• F5 means that the parameter setting is finished and the body fat
measurement is started. Place both hands on the pulse pads and wait 8
seconds until the window shows your BMI.
Evaluation
• A BMI below 18 means underweight.
• A BMI between 18-24 means normal weight.
• A BMI between 25-29 means overweight.
• A BMI over 29 means obese.
EN
43