Phantom PHOTOBIO-MX Manual Del Usuario página 8

d. Once the driver is in position, make sure to screw in the 2 orange driver fasteners (Part F).
This step is important to secure the driver in place, see Fig. 8.
CAUTION
Mechanical hazard: Risk of driver falling off fixture if not properly secured.
Step 4. Connecting driver to light fixture.
Plug in both DC cables of LED light panels to driver's DC side, see Fig. 9. Spin the orange cap
till tight. Make sure each cable plugs into its adjacent connector.
8 www.phantombio.com
USER MANUAL
Fig. 8
Attention: If the driver is stuck on the
track, please review following:
a�. If the lighting fixture and driver are flat
b�. If the driver is placed on track in the
correct direction
c�. If driver's start position on the track is
correct
Fig. 9