Lorex E881AP Serie Guia De Inicio Rapido página 12

Step six.
1. Pull the connection cables through the
wall mount and mounting surface.
2. Use the allen key (B), mounting screws,
and flat washers (x4) to firmly secure
the wall mount to the mounting surface
(see Figure 7).
Note: If mounting the camera
on a drywall surface, you must
drill at least 2 of the mounting
screws through a wooden stud
to ensure a stable mount.
3. Remove the protective vinyl sheet
covering the camera lens.
Note: For full instructions on controlling the PTZ camera with the NVR, refer to the
PTZ camera's manual at lorex.com.
Figure 7
Allen key (B)
Mounting screws
and flat washers (x4)