Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1 & 2
Tab locks
into hole
4
5
6
Left ★
To Assemble Rear Wheels
To Assemble Front Wheels
Right ▲
5
Turn stroller over as shown.
1
Position Rear Axle Assembly as shown,
2
with red brake levers pointing towards
stroller handle.
Push Rear Axle Assembly onto rear leg
3
tubes at the same time.
Make sure plastic tabs on rear axle lock
4
into holes on rear legs as shown.
Slide a Rear Wheel onto the axle then
5
slide a Washer onto the axle.
Fit straight part of Cotter Pin through
6
hole on axle as shown.
Line up each of the tabs in the Hub Cap
7
with the slots in the wheel, snap Hub
Cap into place.
Repeat for second side.
8
Place stroller back on handle bars.
1
Locate "▲" and "★" underneath Front
2
Wheel Assembly . Align assembly with
front axle and snap into place as shown.
Repeat for other Front Wheel Assembly.
3
Tug firmly on each wheel assembly to be
sure wheels are securely in place.
NOTE: To remove, push spring loaded
button in and pull off wheel.
Tabla de contenido
