Himsa NOAHlink Manual Del Usuario página 18

12. Ensure that NOAHlink is still turned on. (If NOAHlink remains
idle for more than 30 minutes, it will automatically turn off.)
13. The NOAHlink Pairing Wizard window appears. Press Search to
search for NOAHlink devices.
14. The program searches for your NOAHlink. When a list of devices
appears, select the NOAHlink you wish to use. Click Pair
NOAHlink.
15. A window appears stating The NOAHlink device was
successfully paired. Click OK.
16. Refer to Chapter 8 in order to configure your NOAHlink unit.
17. NOTE: If you have more than one NOAHlink unit, it is
recommended that you attach one of the name labels that are
included in your NOAHlink package to the back of your
NOAHlink and write a suitable name on this label. Refer to
Section 8.1.1 for details on naming NOAHlink via your PC.
18. Refer to the NOAHlink site at

a list of fitting modules that support NOAHlink. These
modules can use NOAHlink for programming hearing
instruments.

support and troubleshooting
NOAHlink Users Manual
www.himsa.com for:
15