Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2
Figure 4
Keyhole Slot
Keyhole Screw
Wall Anchor
Figure 5
Figure 6
Helpful Videos – www.hzsupport.com
4. Mount push button. Use either screws or double
sided tape to mount push button.
• Screw Mounting: To mount with screws, remove
back of case by pushing in tab on bottom with a
small screwdriver (see Figure 1). Note: Remove
material in screw holes (if needed) before mounting
with screws. Attach back of case to door jamb or
wall (see Figure 4). Snap front of push button on.
• Tape Mounting: When attaching push button
using double sided tape, make sure the surface
of the door jamb or wall is clean.
5. Mount chime. Determine mounting location.
• Drill one 7/32 in. (5.5 mm) pilot hole and insert a
wall anchor.
• Mount keyhole screw to wall leaving about 1/8"
(3 mm) of the screw threads exposed.
• Using keyhole on back of chime base, hang base
on screw (see Figure 5).
Chime Mute
The chime can be muted for a select period of time:
full-time, 3 hours, 6 hours, 9 hours, or 12 hours. Press
and release the mute icon to select the amount of time
the chime should be muted (see Figure 6). The mute
icon will turn green each time it is pressed to show the
amount of time selected.
OFF
Full-Time
Note: The chime will flash the selected color each
time the push button is pressed whether the chime is
muted or unmuted.
Operation
3Hr
6Hr
Helpful Answers – 1-800-858-8501
9Hr
12Hr
Tabla de contenido
