Página 1
A301 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for more information san.us/451...
Página 2
(3/16in.) Ready to begin? The Sanus Accents A301 cable tunnel kit conceals and routes complex cable arrangements. The A301 can be cut and painted to your desired size and color. Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Página 4
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Página 5
STEP 1 Attach Cable Clips Drywall Mark the hole locations using the cable tunnel clips as a template. Use a level to ensure clips are installed in a straight line. NOTE: Cable tunnel clips can be installed in either a horizontal or vertical orientation. Horizontal Horizontal Vertical...
Drill pilot holes using a 4.5 mm (3/16 in.) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 25 mm (1 in.). Insert anchors and then tighten screws using a screw driver. 25 mm (1 in.) 4.5 mm (3/16 in.)
Página 7
STEP 1 Attach Cable Clips STEP 1 Attach Cable Clips Solid Concrete or Concrete Block Option Mark the hole locations using the cable tunnel clips as a template. IMPORTANT: Cable tunnel clips must be installed directly onto the concrete surface. NOTE: Cable tunnel clips can be installed in either a horizontal or vertical orientation Horizontal Horizontal...
Página 8
Drill pilot holes using a 4.5 mm (3/16 in.) diameter drill bit. Remove the cable tunnel clips. IMPORTANT: Pilot holes must be drilled to a depth of 25 mm (1 in.). IMPORTANT: Never drill into the mortar between blocks. Insert anchors and then tighten screws using a screw driver. 25 mm (1 in.) 4.5 mm...
Página 9
STEP 2 Assemble Cable Tunnels Assemble cable tunnels to fi t your size and location needs...
Página 10
STEP 3 Attach Cable Tunnels to Cable Tunnel Clips Thread wires through the cable tunnel clips Snap cable tunnels onto cable tunnel clips to cover wires.
Página 12
2. ¿Tiene todas las herramientas necesarias? 3. ¿Listo para comenzar? El kit de túneles de cableado Sanus Accents A301 oculta y permite pasar conjuntos de cables complejos. El A301 se puede cortar y pintar para que tenga el tamaño y el color deseados.
ESPAÑOL ESPAÑOL Realice los orificios guía con una mecha de 4,5 mm (3/16") de diámetro. IMPORTANTE: Los orificios guía deben realizarse hasta una profundidad de 25 mm (1"). Inserte los anclajes y luego ajuste los tornillos con un destornillador. PASO 1 Colocar los sujetacables (Cont.) Opción para hormigón sólido o bloques de cemento Ver página 7 PRECAUCIÓN:...
Página 14
Thank you for choosing Sanus Accents! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: [email protected] Leave a review: accents.sanus.com Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.