Extension Rail; Gold 5/16" Flat Head Screw - Sauder Shoal Creek Lateral File 418658 Manual Del Usuario

Step 6
Separate the EXTENSION SLIDES (M) from the
å
EXTENSION RAILS (L) as shown in the upper diagram. Be
prepared, the parts are greasy.
Fasten the EXTENSION RAILS (L) to the ENDS (A and B).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
NOTE: For each EXTENSION RAIL, turn a SCREW into the
å
hole shown in the enlarged diagram. T hen, slide the inner
cartridge of the EXTENSION RAIL out to fi nd the other
hole that lines up with the hole in the END. Turn a SCREW
into this hole.
Push the black lever in and pull the SLIDE from the RAIL.
Hole
Page 10
M
B
L
Open end
L
A

GOLD 5/16" FLAT HEAD SCREW

418658
Open end
L
3S
(4 used in this step)
www.sauder.com/services