ASROCK 4Core1333-Viiv Manual Del Usuario página 23

Step 5. Correctly connect the DVI-DMS cable to the monitor connector and two
graphics cards that you install. (If you install two standard Radeon
TM
(CrossFire Ready) graphics cards to this motherboard, please skip this
step.)
DVI-DMS cable
Connect the DVI-DMS
cable to DVI connector of
the compatible standard
TM
Radeon (CrossFire
Ready) graphics card.
Radeon
TM
CrossFire
Edition graphics
card
Connect the DVI-DMS
cable to DMS connector
of the CrossFire
graphics card.
If you install two CrossFire
connect one end of DVI-DMS cable to the monitor, another end to DMS of one
of the CrossFire
DVI of another CrossFire
Express x4). If you install one CrossFire
compatible standard Radeon (CrossFire
motherboard, please connect one end of DVI-DMS cable to the monitor,
another end to DMS of the CrossFire
to DVI of the compatible standard Radeon (CrossFire
ASRock 4Core1333-Viiv Motherboard
DMS connector
Standard Radeon (CrossFire
graphics card
DVI connector
There are two DVI connectors on the
standard Radeon (CrossFire
graphics card. Please connect the DVI-DMS
cable to the correct DVI connector; otherwise
, the graphics card will not work.
DMS
connector
TM Edition
TM
Edition graphics cards to this motherboard, please
TM
Edition graphics cards to PCIE2 slot, and the other end to
TM
Edition graphics card to AGI Express slot (PCI
TM
Edition graphics card and one
TM
Ready) graphics card to this
TM
Edition graphics card, and the other end
DVI connector
TM
Ready)
TM
Ready)
Connect the DVI-DMS
cable to the monitor
connector.
TM
Ready) graphics card.
2 3 2 3 2 3
2 3 2 3