Charging Battery - ViewSonic ViewPad E70 Guia Del Usuario

• AC adapter and plugs
• Quick Start Guide
• Compliance information
1.3 Installing microSD/SIM Card
®
You need a microSD
To install the microSD card
1. Open the card cover.
2. Insert the microSD card as shown. Make
sure the gold contacts are facing down.
To remove the microSD card
1. For safe removal, tap
Storage > Unmount microSD card.
2. Open the card cover.
3. Push to eject the microSD card from the slot.
NOTE: Do not remove the microSD card while the device is turned on. Sudden
removal of the microSD card may cause data loss or unpredictable system
hang up.
To install the SIM card ( select model )
1. Open the card cover.
2. Insert the SIM card as shown. Make sure the gold contacts are facing down.
To remove the SIM card
1. Open the card cover.
2. Push to eject the SIM card from the slot.
3. Close the card cover.
NOTE: Do not remove the SIM card while the device is turned on. Sudden removal
of the SIM card may cause data loss or unpredictable system hang up.

1.4 Charging Battery

The battery is only partially charged. To fully charge the battery, charge it for 3 hours.
Charge the battery
card to store photos, music, videos, and other data.
> Settings >
3
Insert the SIM card
towards the
direction indicated
by arrow.
Insert the microSD card
towards the direction
indicated by arrow.