Idiomas disponibles
Idiomas disponibles
Install the Fixture
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
1
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
2
3
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
4
Secure the fixture to the post with post screws.
5
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Install the hex nut onto the threaded pipe, then place the shade over the threaded pipe and into the fixture.
6
Place the cover base on top the shade, then place fixture cover and washer onto the threaded pipe and secure them in
7
place by screwing the finial onto the pipe.
FINIAL
HEX NUT
FIXTURE COVER
THREADED PIPE
FIXTURE
4
BLACK WIRE
3
HOT WIRE
POST
7
WASHER
6
LAMP
5
WHITE WIRE
1
2
NEUTRAL WIRE
2
COVER BASE
POST SCREW
