HIKOKI M 3612DA Instrucciones De Manejo página 11

USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.
<USB charging>
○ Charging a USB device from an electrical outlet
(Fig. 27-a)
○ Charging a USB device and battery from an electrical
outlet (Fig. 27-b)
○ How to recharge USB device (Fig. 28)
○ When charging of USB device is completed (Fig. 29)
NAMES OF PARTS (Fig. 1–Fig. 29)
Battery
Motor
Head cover
Dial
Stopper pole
Depth indicator
Wing bolt
Lock pin
Stopper block
Base
Sub base
Collet chuck
Straight guide
Wing bolt (A)
Lock spring
ON/OFF Lock button
Name plate
Handle
Switch trigger
Lock lever
LED light
Threaded column
Latch
Charge indicator lamp
Bit
23 mm Wrench
Loosen
Tighten
Scale
Nuts
Cut depth setting
screw
Nut
11
Template guide
Screw
Template
Guide bar
Bar holder
Feed screw
Wing bolt (B)
Separate
Work piece
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
M3612DA: Cordless Router
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Direct current
V Rated voltage
n
No-load speed
0
Disconnect the battery
Switching ON
Switching OFF
Lock
Switch locks to the "ON" position
Warning
English
Rotation of bit
Router feed
Inner peripheral cutting
(Clockwise)
Outer peripheral cutting
(Counterclockwise)
Trimmer guide
Roller
Dust collector
Knob nut