Description Of The Parts; Important - miniland baby warmy digy Manual Del Usuario

ENGLISH
4. PRODUCT FEATURES

4.1. DESCRIPTION OF THE PARTS

1. Main body
2. Control panel
3. Adaptor ring
4. AC plug
5. Heating basket
6. Measuring cup
7. Time indicator
8. Selector to reduce
9. Selector to increase
10. On/off switch
11. LED power status indicator
12. LED heating cycle in progress status indicator
5. INSTRUCTIONS FOR USE
5.1. HEATING FUNCTION (baby bottle, water for formula or jar of baby food)
This device is suitable for heating a baby bottle or a jar of baby food. Remember that jars
of baby food must only ever be inserted after previously removing their lid. For safety
purposes, always check that the temperature reached after heating is the desired one.
1. Place the device on a suitably flat surface, making sure that it is out of the reach of
children.
2. Insert the plug into the electrical socket. A beeping will be heard and the LED power
status indicator (11) will illuminate with a green colour.
3. Add to the heating tank the volume of water stated in the tables shown below in this
section according to the volume and temperature of the baby bottle/food.
4. Insert the receptacle to be heated into the body of the device contained by the basket
(5).
IMPORTANT: Always use the heating basket. The baby bottles or jars of baby food
must never come into direct contact with the heater, since this could mean that
heating is not optimal and the baby bottle/jar of baby food could be damaged.
5. Push the power button (10) to turn the unit on. The pre-set time on the device will
appear flashing on the display (7).
6. Using the selection arrows (8 and 9), increase or decrease the heating time according
to the information shown in the guide tables which are set out below. Then, push the
power button again (10).
7. Following this, the LED which indicates the heating cycle in progress (12) will
illuminate with a green colour, and the device will commence operation.
NOTE 1:
If you wish to temporarily interrupt the heating process, push the power button (10). To
restart the process, push the same button again.
If, however, you wish to terminate the heating process completely before the time
indicated runs out, keep the power button (10) pushed down for four seconds.
8. Once the heating process has been completed, the device will beep and the process
status indicator (12) will turn itself off to notify the user.
9. Taking the relevant precautions to avoid burns, remove the receptacle and check the
temperature of the product before giving it to your baby.
12