Use Of The Bicycle - Littium Ibiza TITANIUM Manual Del Usuario Y Garantía

C. PAS level selection
When the screen is on, you can click on the buttons / to adjust the level PAS 0/1/2/3/4/5 which
will change the output power of the motor.
D. Battery indicator
If the battery is fully charged, five bars will be displayed. As the battery runs out, the bars will decrea-
se.
E. Walk mode
By pressing the button for 2 seconds the e-bike will enter assistance mode while walking until it
stops being pressed.
F. Display information
The different information can be viewed by pressing the M button. The current distance, time of use,
average speed, maximum speed and total distance are displayed.
G. Data reset
To reset the distance, speed and time values, press the M button for 2 seconds and then press the M
button again.
H. Defining the error code
When the ebike's driving system fails, it will stop working and the display will show the error code
automatically. Until the problem is solved, the error will not stop showing on the display.

Use of the bicycle

Once the control panel has been connected, the 100% charged battery and the checked bike can used
as normal.
We recommend using position 4 or 5 for steep climbs.
The brakes are equipped with a device that cuts off the power to the motor, thereby preventing
accidents.
50