Important Advice - therm-ic POWERGLOVES Manual Del Usario

will start automatically and the charge indicator
light (2.1) turns red and remains on during charging.
2. When the batteries are fully charged, the charging
process will stop automatically and the LEDs in the
charge indicator light (2.1) will turn green again.
3. Unplug the two PowerGloves connectors from the
USB charger.
4. Zip up the PowerGloves.
Charging time is approximately 6-8 hours.
Note that at half time of the charging time
mentioned above, the battery is already charged at
around 75% of its maximum capacity (fast charging
process). Lab test done using Therm-ic USB wall plug
universal charger (optional).

Important advice:

• Recharge the batteries after each use to keep
them in good condition and to ensure the Therm-ic
PowerGloves are always ready for use.
• Each battery is made up of lithium-ion cells.
It can be recharged in any state of charge.
Consequently, it is not necessary to discharge
the batteries completely before recharging.
Important:
Never try to open a battery pack! There is a danger
of explosion if the lithium-ion batteries are handled
inappropriately. There is also a danger of damaging
the electronic components of the PowerGloves.
INSTRUCTIONS FOR USE AND DESCRIPTION
OF FUNCTIONS
The Therm-ic PowerGloves have four modes:
OFF and LEVELS 1, 2 and 3.
These modes are indicated by a heating speed
indicator light (1.1). The number of LED flashes
displayed indicates the heating level selected.
The heating setting of the Therm-ic PowerGloves can
be set to 3 different levels (level 1, level 2 and level 3)
using the control zone, which consists of a single
button (1.2). The Therm-ic PowerGloves are off when
the LED heating level indicator light is not lit.