Product Description; First Use; Charging - ANSMANN 1600-0295 Instrucciones De Servicio

Reflector led recargable
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
The lamp shall not be placed face-down or allowed to topple face-
down. There is a risk of fire with this. In order to prevent toppling, the
lamp must be used only as intended.
Information for the light, mains adapters and mains voltage on the
socket must match with the type plate.
This product is not to be used by persons (including children) who have
restricted physical, sensory or mental capabilities or who do not have
adequate experience and knowledge in handling this product. Such
persons must be instructed beforehand by a supervisory person who
is responsible for their safety or must be supervised during the use of
the product!
All illuminated objects must be at least 10cm away from the light!

PRODUCT DESCRIPTION

1 Carry handle
2 Adjusting screws
3 Rechargeable battery capacity
indicator
4 On/off button

FIRST USE

The on/off button* is on the back of the housing.
Press 1x: 50%
Press 2x: 100%
Press 3x: Off
* Press and hold whilst switched off: Soft-start dimming 350-3200 Lumen
* Press and hold whilst switched on: Dimming 350-3200 Lumen

CHARGING

Charge the product fully before using it for the first time. Likewise, when
storing over an extended period of time, charge beforehand and charge at
least 1x per year during storage in order to prevent the rechargeable battery
pack deep-discharging.
To do so, pull the sealing cap out of the charge socket on the rear of the
housing and plug in the charge plug. Then plug the mains adapter into
Deutsch |
14
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
English
| Français | Español | Português
5 Protective rubber coating
6 Charge socket
7 Base
Tabla de contenido
loading

Este manual también es adecuado para:

Fl3200r

Tabla de contenido