Idiomas disponibles
Idiomas disponibles
Instructions for Storaging
1. Push the button in on the smaller section first and slide in until it stops.
2. Push in the second button on the largest section and slide in until it catches in the hole
at the top of the ramp for storage.
3. Place the ramps in the carrying bag which has loops to hang on the back of the wheelchair.
4. To prevent the ramps from scratching each other, place a cardboard between the ramps.
Warning
Do not exceed the max. load of 200 kg. The weight of the user must be taken into
consideration if the wheelchair or scooter is occupied.
Recommend tom use the ramps with the help of a qualified helper. The helper should not
walk on the ramps.
Always back the wheelchair down the ramps; never go in a forward direction.
Ensure that the spring buttons are fully engaged in the holes.
Before each use, make sure the product's safety and integrity.
Periodically inspect for wear and damage.
Maintenance
These ramps are made of anodized aluminium which gives them a tough tarnish resistant
finish. The push buttons are made of zinc plated spring steel for years of rust free operation.
To clean the ramps, use any mild detergent and water.
