Satco NUVO 65-223 Instrucciones De Instalación Y Seguridad

LED VAPOR TIGHT FIXTURES
Models: 65-223, 65-224, 65-225, 65-226
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING:
Risk of Fire or Electric Shock
To reduce the risk of fire, electrical shock or injury to persons; read
•
and follow all warnings and installation instructions before installing.
• All installation should be performed by a qualified electrician.
• To avoid electric shock, ensure power is turned off before installation
or inspection. All wiring must be installed in accordance with Electrical
Code and local electrical code.
• To prevent fire, this fixture is rated for use in 100-277V, 50-60Hz
protected circuit.
• To prevent product malfunction and/or electrical shock, this product
must be properly grounded.
To avoid damage and/or product malfunction, do not modify the
•
fixture or replace accessories without confirming with the supplier first.
• To prevent wiring damage or abrasion, do not expose wiring
to edges of sheet metal or other sharp objects.
• Suitable for wet locations.
IMPORTANT:
This product must be installed in accordance with the
applicable installation code by a person familiar with the construction
and operation of the product and the hazards involved.
INSTALLATION:
STEP 1: Hold the fixture to the mounting
surface and mark the position of the screw
holes. Refer to dimension diagram to mark
and drill holes. Insert a plastic anchor (not
included) into each hole.
STEP 2: Refer to the wiring diagram.
Strip wires to connect with power input
line in junction box. (L = Black, N = White,
G = Yellow/Green).
STEP 3: Hold the fixture to the mounting
surface and make sure the holes are
aligned. Insert M6 screw into each hole
and tighten to secure fixture. Apply
waterproof sealant to seal any gaps
around the wall and the junction box.
© Copyright 2019 Satco Products, Inc. 1/19
DIMENSION DIAGRAM
Wall Mount
Plastic Anchor (Tox)
Connect
Wires
M6 Screws
Wall Mount Celing Mount
WIRING DIAGRAM
Ceiling Mount
Plastic Anchor (Tox)
Connect
M6 Screws
Satco Products, Inc.
Brentwood, NY 11717
Wires