Smartpond 52256 Manual De Instrucciones página 9

Step 4. Choose a
fountain head for the
desired water effect, and
assemble to the top of the
extension tube as shown.
To run the cord over the
side of the container,
proceed to step 5. To drill
a hole in the side wall of
the container to run the
cord through, proceed
to step 6. To run the cord
through the bottom of the
container, skip to step 8.
Step 5. Place the
assembled container
fountain kit in the
container, and drape the
cord over the side of the
container. Continue to
step 11.
Step 6. If you would like
to run the cord through
the side of the container,
select a spot on the
container's wall that is the
least visible for the cord
exit. Drill a hole that is approximately 1 1/4 in. in diameter.
NOTE: Appropriate safety equipment should be used while
drilling.
Step 7. Place the pump inside the container and run the cord
through the hole. Push the rubber stopper on the cord into the
hole until it seals well. Continue to step 11.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
E
D
G
C
C
5
Cord
4
F
G
C
6
7
6