Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SOLUTIONS TO PROBLEMS MOST FREQUENT
__________
EVACUATE THE DRAIN NO WATER
POURED.
• Check for clogged drains this dish.
• Verify that the drain housing meets standards, and has adequate circulation.
CABIN PRESSURE
FAILURE.
• Check the water pressure in the house, if you have enough pressure in the housing, may be due to the
hydraulic circuit is clogged cabin by the lime, contact an authorized service.
• Verify that the patch cords that go to the water intakes are not bent.
NOT ENOUGH HOT
WATER.
• Verify that you have hot water in the rest of the bathroom.
• Check water outlets as it may be that the hot water hose that bending.
• Check the thermo housing and that this might not provide enough clogged and water flow.
SCREEN DOORS NOT PROPERLY
SLIDE.
• Make sure the guides are clean the screen.
• Check that the wheels are unobstructed sliding and rotating correctly.
• Make sure the doors are properly leveled
PRECAUTIONS
1. The AC power supply must be 220V ± 10 % 50Hz .
2. We recommend placing a 30mA minimum sensitivity ( high-end models already incorporate such a device ) .
3 . The power cord must be at least 6mm2 section .
4 . The connection to the mains should always be performed by a watertight junction box .
5 . The pressure of the housing should be between 0.2-0.4 MPa. The temperature of the hot water entering the bath
should not exceed 65 º.
6. The cabin installation should be performed by qualified personnel in accordance with
7. Children can use the cabin under the supervision of aldultos
8. Do not rub or strike the surface of the car with hard objects to avoid damage.
9. The maintenance and cleaning of the cabin should be performed with the power off .
10. The switch must be reviewed every two years by an electrician to ensure that it working properly.
11. We recommend placing two keys cut one for hot water and one for cold water for safety in case of failure .
12. The bathroom must be completely leveled and tiled to place the cabin.
13 . Prohibitions for the user:
Modify or adapt the cabin without the express consent of the manufacturer or
dealer.
Open the electrical box or control panel to manipulate .
Cut any cable or splicing
Any breach by User of these warnings , which could cause an accident or damage, release the manufacturer from
35
Tabla de contenido
