Tabla de contenido
REMARK: The device is intended to clean the wet mud, damp dust, wet sand. The device is not a dirty water pump to collect big quantity of
water from for example the flooded basement.
Function 6: Blower
Blower helps to make order with fallen leaves in your garden or it helps to clean difficult to reach corners from dust. Fit the cover of blower
(14) on the back of the main cover (7), next put the construction gasket (27) on the edge of stainless steel container (4). and insert the
plastic hose (17) into hole in the cover of blower (14).
Tool socket with synchronization – Picture D
It is additional function of this device useful for construction branch that is extremely valuable with connection of the fact the device is
equipped in extra-long 15 meters power cord.
The position "II" of switch (1) is only used when the other electric construction tool: e.g. wall sander had been plugged into the vacuum
cleaner. When press the button to the 'II' position the vacuum cleaner doesn't work. But after the user connect the e.g. the wall sander, the
vacuum cleaner will start working in 2 seconds. If the user switches off the wall sander, the vacuum cleaner will keep working for 8 seconds,
so that it can suck up the left dust and after 8 seconds, the device stops working automatically. Tool socket is designed for the collaboration
work of the vacuum cleaner and other power tools. The power of socket is 2000W. Use the tool adapter (23) and the plastic hose (17) to
assemble your electric construction tool.
CLEANING AND MAINTENANCE
Switch off and unplug the device before cleaning and maintenance work.
A. Cleaning of filters.
1.Wash the filters with water (at 40℃ max). When washing HEPA filter (12) / sponge filter (13) / cotton filter (20), please be gentle and
avoid brushing them, as they can be torn easily.
2.Remember to dry each filter for 24 hours at least before reusing them. You can contact with your local retailers for buying the spare ones.
3. Paper bag cannot be washed. Once it's full, please remember to replace it with a new one.
B. Cleaning of accessories
1. Wash hoses, the telescopic tube and the floor brushes regularly in order to avoid any trash blocking them.
2. Shake off the water left inside after cleaning, and make sure they are dried for at least 24 hours.
C. Cleaning of tank
1. Clean the surface of the tank and inside of it.
2. Remember to wipe it up!
TECHNICAL SPECIFICATION:
Tank capacity 25 liters
Air flow 36L/S ( 2.16m³/h )
Suction power 20 kPa
Nominal power 1400 W
Power tool socket with synchronization: 2000W
Maximum power 3400W
Power supply 220-240V ~50/60Hz
Noise level: 82 dB
Product dimensions 55 x 40 x 40 cm
WICHTIGE SICHERHEITSHINWEISE SORGFÄLTIG DURCHLESEN UND FÜR DIE
1. Lesen Sie vor der Verwendung des Geräts die Bedienungsanleitung und befolgen Sie
die darin enthaltenen Anweisungen. Der Hersteller haftet nicht für Schäden, die durch die
Verwendung des Geräts im Widerspruch zu seinem Verwendungszweck oder einer
unsachgemäßen Bedienung entstehen.
ZUKUNFT AUFBEWAHREN
7
Tabla de contenido
