Maintenance And Cleaning; Ec Declaration Of Conformity - Würth DSA 8-S Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-0000000312-001.book Page 10 Thursday, May 3, 2018 7:34 AM

Maintenance and Cleaning

The hose reel and hose are to be checked regularly for
damages, and to be wiped off with water or other sol-
vent-free liquid.
Repair any defects immediately. Replace a defective
hose immediately. For an inspection or spare parts,
please contact your Würth after-sales service agent.
If the device should fail, despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by a Würth masterSERVICE.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the device.
The current spare parts list for this device can be
viewed on the Internet at
"http://www.wuerth.com/partsmanager" or be
requested from your next Würth branch office.
Guarantee
For this Würth device, we provide a guarantee in
accordance with the legal/country-specific regulations
from the date of purchase (verified by invoice or deliv-
ery document). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the device is sent undis-
assembled to a Würth branch office, your Würth sales
representative or an authorised customer service agent
for Würth compressed-air and power tools.
Disposal
The device, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of the device into household waste!
EC-Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standarisation documents: EN ISO 12100:2010 in
accordance with the Directives 2006/42/EC.
Technical file at:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
Frank Wolpert
Head of Product
Management
Authorized Signatory
Künzelsau: 19.04.2018
Subject to change without notice.
Dr.-Ing. Siegfried Beichter
Head of Quality,
Authorized Signatory
10