Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Step 4
Tools Needed: Phillips® #3 Screwdriver & 10mm Combo Wrench
Flip Cart Over. Place washer (#4) onto round head bolt (#3).
Insert bolt assembly into aligned bolt holes of bottom shelf (#7)
and legs (#2) of front right. Place washer (#4), then split lock
washer (#5) and then hex nut (#6) onto bolt assembly and tighten
but do not torque.
Repeat entire process for rear right.
Step 5
Tools Needed: Phillips® #3 Screwdriver & 10mm Combo Wrench
Place the cart upside down. Torque all eight bolt assemblies
(#3, #4, #5, #6) to 5 ft lbs.
Locking Swivel Caster (#8)
Non-locking Swivel Caster (#9)
UC3016-BK/ UC3016-BL/ UC3016-LG/ UC3016-OR/ UC3016-RD
6
UC3016-BK/UC3016-BL
UC3016-LG/UC3016-OR
4 & 5
Bottom Shelf
(#7)
Step 6
ATTACHING CASTERS
Insert the casters (#8) & (#9) into the hole in the white plastic
inserts until the caster is flush with the white plastic insert.
Using a rubber mallet, hammer the casters in place until the
stem is no longer visible. Repeat with the other three casters.
NOTE: Make sure the two casters with locks (#8) are on the same
side of the cart.
4
UC3016-RD
UTILITY CART
Round Head Bolts (#3)
Washer (#4)
Split Lock Washer (#5)
Hex Nut (#6)
Chrome
Legs (#2)
07/22/2020
Tabla de contenido
