Video Output Switch - SAFE-TECH SVD-I4 Manual Del Usuario

are allowed. The default administrator password is 0000.
When the operator password is entered,
NOT allowed to access. The operator user level needs to be set in the main menu "SYSTEM" Æ "TOOLS".
To switch between these two user levels, click the current user level icon to switch to the key lock mode, and
move your mouse to show the password input keypad, and enter the password of the user level you want.

3.5 Video Output Switch

Note: Check the monitor (either LCD or CRT monitor) is connected to the DVR before the DVR is powered
on for correct video output detection.
It's not allowed to have video output simultaneously on a CRT monitor (connected to MONITOR) and LCD
monitor (connected to VGA).
The default video output setting is "AUTO", meaning the DVR will automatically detect the video output source.
When VGA and MONITOR are both connected, the default monitor output is VGA.
To change the video output setting manually:
„
To force the video output via MONITOR, press the left key
„
To force the video output via VGA, press the right key
The setting is changed when you hear a short beep sound.
OR:
When the DVR is powered on and initialized, right-click to show the main menu, and select "ADVANCE CONFIG"
Æ "DISPLAY" Æ "DISPLAY OUTPUT PATH".
Select "VGA" to switch to the connected LCD monitor, or "COMPOSITE" to switch to the connected CRT monitor.
The DVR will then reboot for the change to take effect.
DE-INTERLACE
CAMERA
FULL SCREEN DURATION
DETECTION
QUAD SCREEN DURATION
ALERT
DISPLAY COVERT
NETWORK
HDD DISPLAY MODE
SNTP
DISPLAY DISPLAY OUTPUT PATH
ALPHA BLENDING
RECORD
REMOTE
EXIT
will be shown on the status bar of the screen, and the main menu is
on the DVR front panel at DVR power-on.
ADVANCE CONFIG
(For Selected models only)
(For Selected models only)
7
on the DVR front panel at DVR power-on.
OFF
03
03
ON
HDD SIZE
AUTO
200