Tabla de contenido
AR750S-DP Secure VPN Router
•
To connect via a LAN, use an Ethernet cable to connect the router's
switch port(s) to the device(s) on the LAN. Select the LAN PC from
which you wish to configure the router. The PC should be in the same
subnet as the part of the LAN that contains the router (for example, the
PC could be connected to a hub or Layer 2 switch that is directly
connected to one of the router's switch ports).
2. Assign the PC an IP address in the same subnet as the router.
The router's default IP address is 192.168.1.1, and the default subnet mask is
255.255.255.0.
3. Browse to the GUI.
If you access the Internet through a proxy server, set your browser to
bypass the proxy for 192.168.1.1. Point your web browser at 192.168.1.1.
4. Log in and set the password.
At the login prompt, enter the login name and password. Passwords are case
sensitive.
User Name: manager
Password: friend
The system status page appears and you can now use the GUI to configure
the router.
Important To ensure configuration settings are saved correctly, use the
GUI menus and buttons to navigate, not your browser's buttons.
16
Hub or Layer 2 Switch
ON
OFF
POWER
AR750S-DP Router
AR750S-DP
Secure VPN Router
STATUS
ETHERNET
PSU 2
PSU 1
SYS
0
RESET
10BASE-T/100BASE-TX SWITCH PORTS
4
3
2
1
ETHERNET
SWITCH PORTS
1
2
4
SWITCH PORTS
PIC
1
L/A
L/A
D/C
D/C
1
1
2
3
4
5
0
0
1
3
Switch Ports
PC
CONSOLE
PIC1
PIC0
5
ASYN0
PIC BAYS
750S-DP_Hub
Tabla de contenido
