Klarstein ICETOWER Manual Del Usuario página 13

• If you use the device for the first time, make sure to remove any
label or protective sheet which blocks its proper functioning.
• Plug and unplug the power cable with dry hands and hold it firmly.
• Before plugging the plug into a wall outlet, make sure that the unit
is switched off.
• Always unplug the power cable to avoid the overheating and
avoid stretching it.
• Make sure that all air intakes and outlets are free and not covered
so that the unit does not overheat.
• Avoid placing the power cable on abrasive or sharp surfaces or
in positions where it can be damaged easily.Do not hang the fan
on the wall or ceiling unless this type of installation is provided and
explained in this manual.
• Place the device at a proper distance from the objects or
surrounding walls making sure that its functioning will not cause
accidental damages.
• Do not use the device near gas stoves or open flames in general.
• Do not use the device near curtains or textiles.
• Do not cover the device during functioning.
• Do not expose yourself for a long period to the air flow generated
by the device because it can cause damage to the health.
• If the fan must be stored for a long period and is not used
regularly, place the fan in its original packaging in a dry place.
• Always remember to unplug the power cable of the device if it is
not used for a long period, before storing, cleaning or performing
any maintenance operation.
• Do not use the appliance in the presence of potentially flammable
or explosive liquids or gases.
• This product is intended for household use only and not for
commercial/industrial or outdoor use.
Notes on fan overheating protection
• There is a thermal fuse installed in the fan motor, when the motor
is overheated due to a variety of accidents, and the motor
temperature reaches the level to activate the thermal fuse, the fuse
will be blown out to cut off the power.
EN
13