Conceptronic CBTHS2 Manual Del Usuario página 14

ENGLISH
Product care
Use of non-original accessories may result in performance deterioration, injury, products'
-
damage, electronic shock, and warranty termination.
Attempt to disassemble your Headset may damage it, and the warranty will be void.
-
Do not put the Earbridge in a dusty place.
-
Use only a clean soft cloth to clean your Headset.
-
When the Earbridge is not in use, always keep it in its case.
-
Do not allow children to play with your Earbridge, as they may injure themselves and
-
damage the Earbridge as well.
Do not place the Earbridge in extremely hot or cold temperatures.
-
Children
Do not allow children to play with your Headset, as the small parts may cause a choking
hazard.
Travel Charger
•
The charger is designed for indoor use only. Do not use it for outdoors.
•
The charger must be connected to the designated power sources as marked.
•
When removing the charger from an outlet, never pull the charger cord, as it may
damage the charger.
Battery Information
- New batteries
For first time use, plug the adapter into the Headset and charge it at least 4 hours
-
until the red indicator turns off.
- Battery care
Only qualified Service Centers are authorized to remove or replace the battery.
-
The rechargeable battery has a long service life if treated with care.
-
The battery can only be charged in a temperature range of –10 C to 45 C.
-
- Use the battery in room temperature for maximum battery capacity.
The battery capacity may be reduced if operating in a cold environment.
-
The Headset has to be recharged every two months, when it is not in use during a
-
long time.
About Pairing
What is Pairing?
Pairing is a process of associating Bluetooth devices with each other. It will establish a
permanent security link between the devices and enable quick access to the services
provided without the need to enter passkeys.
Bluetooth Passkey
Each Earbridge has a default passkey 1234 for pairing, which is stored in its internal memory.
You are usually required to enter the passkey 1234 in a pairing process with a Bluetooth
mobile phone or other devices, however it depends on the kind of Bluetooth device that the