Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Bath & Shower Chair
ATTACHING THE BACKREST FRAME:
1.
Place seat facing down on a table. Please note the direction of the arrow on un-
derside of the seat. This is to point away from the backrest indicating the front
of the seat.
2.
Locate the 4 long screw knobs (G).
3.
Align backrest frames (F) to the four seat holes (located under the frame holes)
on each corner of seat in the desired position. (fig. 3) Note: The backrest frame
can be vertically adjusted. See inset A below.
4.
At this time, fasten the backrest frame (F) loosely to the seat by inserting 1 long
screw knob (G) through each of the following: backrest frame hole, leg frame
hole, and corner seat hole (fig. 3). Then turn the screw knobs clockwise until
they are only slightly tightened. These will need to be completely tightened after
the back rest is attached.
F
G
AFTER SALES SUPPORT
1 866 558 8096
Fig. 3
MODEL: 1271-15
Assembly
Inset A
PRODUCT CODE: 1271
07/2015
7
Tabla de contenido
