ASROCK K7VT6-C Manual Del Usuario página 6

BIOS:
OS:
CAUTION!
1. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
2. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
3. Power Management for USB 2.0 works fine under Microsoft
XP SP1/2000 SP4. It may not work properly under Microsoft
98/ME.
4. Although this motherboard offers stepless control, it is not recommended
to perform over clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU. The CPU host frequency of this motherboard is determined by
jumper-setting. You must adjust "FSB Select Jumpers" according to the
FSB of your AMD CPU before you set the "CPU Host Frequency" con-
figuration as "Manual" in BIOS. See page 9 for the details of "FSB Select
Jumpers" adjustment, and page 22 of "User Manual" in the Support CD for
"CPU Host Frequency" configuration.
6 6 6 6 6
AMI legal BIOS, Supports "Plug and Play",
ACPI 1.1 Compliance Wake-Up Events,
SMBIOS 2.3.1 Support,
CPU Frequency Stepless Control
(only for advanced users' reference, see CAUTION 4)
® ®
Microsoft Windows 98 SE / ME / 2000 / XP Compliant
ASRock K7VT6-C Motherboard
® Windows ®
® Windows ®