Setting The Clock; Using Your Appliance - FAR CMF2015 CI Manual De Utilización

ENGLISH

SETTING THE CLOCK

If the clock is not showing the correct time, you can change it as follows:
For example: Setting the time to 09:40.
In standby mode, hold the HRS or MIN button for over 1 second and the clock
1.
will start to flash.
Each press of the HRS button will move the clock forward one hour as follows:
2.
.......
0 1 2
Hold the HRS button down to scroll through the hours up to 9.
Each press of the MIN button will move the clock forward one minute as follows:
3.
00 01 02
Hold the MIN button down to scroll through the minutes up to 40.
Do not press any more buttons, and the time will be confirmed after 5 seconds and
4.
will flash to indicate that the adjustment has been saved.
Note:
You must set the clock after plugging the appliance in and it has entered standby
1).
mode.
Once the clock has been set, you can also press the Start button to confirm the new
2).
time.
GB-8
23 0
.......
03 59 00

USING YOUR APPLIANCE

Measure the amount of rice with the measuring cup.
1.
• The measuring cup has a volume of 0.18L (approx. 150 g).
• Rinse the rice in another receptacle. Never do this in the internal tank, as this
could deform or damage the non-stick coating.
Pour the rice into the internal tank, then add water up to the suitable mark on the
2.
internal wall.
• Use the amount of water to suit your tastes, but never exceed the highest mark.
Clean and dry the internal tank, then place it back inside the appliance. Turn it
3.
gently from left to right so that it is in contact with the hotplate.
• There must be no foreign matter between the internal tank and the hotplate.
• Stir the rice so it is evenly distributed in the tank, do not leave it in a pile.
ENGLISH
GB-9