Promax DT-324D Guía Rápida De Configuración página 20

Convertidor ip a asi
Ocultar thumbs Ver también para DT-324D:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TS-OUT (1-4):
Power supply
Connector
Voltage and highest
Consumption
Operating environmental conditions
Altitude
Temperature range
Max. Relative humidity 80 % (up to 31 °C), decreasing lineally up to
Mechanical features
Dimensions
Weight
Included accessories
4 x CC024
4 x CC027
Minimal configuration needed
1 x DT-800
1 x DT-900
RECOMMENDATIONS ABOUT THE PACKING
It is recommended to keep all the packing material in order to return
the equipment, if necessary, to the Technical Service.
Page 4
Off:
Which one of the LEDs indicates a status
corresponding to each ASI output.
Red Light:
Intermittent Light: An input IP stream associated to
Green Light:
Via the DT-800 Control and Power Module.
JST
supplied with the DT-800).
+12 V, <0,2 A ;
+5 V, <1,7 A.
Up to 2000 m.
From 5 °C to 50 °C.
20 % at 50 ºC.
A. 50 x Al. 262 x Pr. 230 mm.
0,820 kg.
Cable BNC/BNC 25 cm.
Cable BNC/BNC 50 cm.
Power and Control Module.
Sub-rack framework to install in a rack or on a wall.
QUICK CONFIGURATION GUIDE DT-324D
Ethernet connection established
and there is data traffic to the
module.
It is not delivering any TS at the
output (probably because there
is not any IP stream associated
to this output).
an output is being processed. It
happens
just
parameter of the IP stream. The
process can take some seconds.
TS are being delivered at the
output.
B08P-XL-HDS
after
setting
(Connecting
Cable
07/2012
a
Tabla de contenido
loading

Tabla de contenido