Taurus Alpatec RCMB23 Manuel De Instrucciones página 8

from the original temperature, the apparatus
will remain in the standby position. If, on the
other hand, the temperature difference is less
than 8 ºC, the heating function will be activated.
7 WEEKLY PROGRAMMER
- Programming for the first time of the day and
current time.
- (This programming must be done after an elec-
trical disconnection and in heating mode)
THE ADJUSTMENT METHOD:
- Press in heating mode
24/7
- 1 Configuration of the weekday: The LED
display will display 01 (Monday); press + or - to
adjust to the current day, 01-07, Monday to
Sunday. Press OK to finish the configuration.
- 2 Configuration of the hours: the LED screen
will display 00 which is 0 h, press + or - to
adjust the current time, 00 to 23, from 0 h to 23
h. Press OK to finish the configuration.
- 3 Configuration of the minutes: the LED screen
will display 00, which is 0 min, press + or - to
set the minutes, of 00 to 59. Press OK to finish
the configuration.
Note: Do not press OK during the 10 s after ad-
justment, as the current time settings would fail.
Once the setup is complete, the current time
appears on the LED screen: P1.
PROGRAMME CONFIGURATION
- Once the current time has been configu-
24/7
red, press on the LED screen of the program
P1 to P6, press OK, select the desired Pro-
gram Mode.
- P6 is the free mode program.
- The LED display shows 1, press + or -, from 1
to 7 which programs from Monday to Sunday,
press OK to confirm the required day.
- a. Once the day is configured, select the acti-
vation time of 0 h to 24 h, then press OK, the
apparatus starts operating at that time.
- b. Then set the time to switch off. The LED
display shows 00, press + or - to set of 0 h to
24 h, press OK to confirm the time to stop the
heating.
- The configuration method for days 2 to 7 is the
same as for day 1.
Note: It is only possible to schedule a programme
interval by days.
It is only possible to programme in hours and not
in minutes.
It is necessary to establish the time to switch on
7
the apparatus, and then to switch it off.
24/7
Once the weekly timer is activated, the light will
flash until the time scheduled for it to switch on.
8 CANCEL
- To cancel the temperature programming, press
- To cancel the weekly programming, first
press then
8
°C
24/7
then to cancel
°C
24/7
to cancel.
°C
24/7
24/7