Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Q
UICK CONFIGURATION GUIDE. DT-232
4 DT-232 CONFIGURATION OPTIONS
The main menu of the DT-232 module allows you to configure each
one of the elements that make up the module. The main menu has the
following options:
RECEIVER
-
DECODER MPEG-2
-
MODULATOR
-
FIRMWARE VERSION
-
SAVE
-
Next, each option is explained in detail.
RECEIVER options
4.1
RECEIVER options are:
LNB Local Oscillator.
-
Defines the oscillator frequency of the antenna (in MHz). If you
have a Universal LNB, generally it is used 9750 MHz for low BAND
and 10600 MHz for HIGH band. It is a numeric field.
DL-Frequency (MHz).
-
It defines the tuning frequency of the satellite. It is a numeric field.
DL-Band.
-
It defines the satellite band. Select among the available values
(C band or Ku band).
LNB.
-
It defines the LNB voltage and band. Select among the available
values (13 V, 18 V, 13 V + 22 KHz, 18 V + 22 KHz, External).
Generally 13 V is used for VERTICAL polarisation and 18 V for
HORITZONTAL polarisation. If you want to tune frequencies
corresponding to the high band of the satellite you should use
+22 KHz.
02/2011
Page 9
Tabla de contenido
