CARE AND CLEANING
CLEANING AND MAINTENANCE
Cleaning the exterior
Turn off the water faucets to shut off the water supply to your washer and prevent
the unlikely possibility of damage from escaping water. Use a soft cloth to wipe up all
detergent, lint or other residue. Clean the control panel with a soft, damp cloth. Do
not use abrasive powders or pads. Do not spray cleaners directly onto the panel.
Cleaning the interior
Clean the interior of your washer periodically to remove any dirt, odor mildew, or
other residue that may remain in your washer after multiple uses or cleaning very
soiled clothes. Failure to follow these instructions may result in unpleasant conditions,
such as odors and/or permanent stains on your washer or laundry. Hard water
deposits should be removed. Use cleaners labeled "Washer safe".
Tub clean
Run a Tub Clean Cycle with some bleach every month or as needed to remove dirt,
mildew, hard water stains or odors.
Note: If you wish to use other products suitable for cleaning laundry tubs, follw the
tub cleaner manufacturers instructions.
Page 26
To run the tub clean cycle Power on the washer and press
PROGRAM to select 08 (Tub Clean). 08 will appear on the digital
display. The load size will automatically be set to 03 (large).
Press the START/PAUSE button to stop the cycle when the tub
is filled with water. You will hear 3 beeps. Open the lid and put
bleach in the bleach dispenser. Close the lid and press the START/
PAUSE button to resume the cycle.