PRODUCT DESCRIPTION:
1. Button
2. LED display
3. Micro-USB charge socket
4. Magnets
5. COB LED
6. LED auxiliary lamp
FIRST USE:
Button
Press 1x: Main LED 100%
Press 2x: Top LED 100%
Press 3x: Deactivation
CHARGING:
Charge the workshop lamp fully before using for the first time. If the lamp has been sto-
red for an extended period of time, it should also be charged before use; charge regularly
during longer periods of non-use.
Switch the lamp off before charging. For charging, pull the sealing cap off the micro-USB
socket on the side of the lamp. Connect the USB charger to the lamp by plugging the
micro-USB plug on one end of the USB/micro-USB charge cable into the micro-USB socket
on the lamp and plugging the USB plug on the other end of the charge cable into the USB
socket of the USB charger.
Note: Do not active the workshop lamp during charging. Check that the lamp is switched
off after starting the charging process.
CHARGE INDICATOR:
The charging process is indicated by a red LED. If the rechargeable battery is fully char-
ged, the LED illuminates green.
CLEANING/MAINTENANCE:
Clean only with a slightly damp cloth, then rub dry.
§
Never submerge the product in water or other liquids.
§
Do not allow fluids to enter the housing.
§
Do not use hard brushes or sharp objects for cleaning.
§
IMPROPER USAGE OF THE LAMP MAY RESULT IN IT BEING
DAMAGED:
Do not throw or drop
§
Use only in original condition
§
Do not use while still in packaging
§
Turn off after use
§
TECHNICAL DATA FOR LAMP:
Article no.:
Illuminant:
Input voltage:
Input current:
Rechargeable battery:
Luminous flux:
Battery life:
Light range:
Charge time:
Protection type:
Deutsch |
10
Svenska | Italiano | Nederlands | Dansk | Suomi | Norsk
1600-0304
3W LED | 4W COB LED
5V DC
Max. 1000mA
Li-ion rechargeable battery pack 3.7V | 2000mAh | 7.4Wh
Main light at 100% 450lm | Auxiliary LED 70lm
Main light at 100% 4,75h | Auxiliary LED 30h
ca. 30m
ca. 5,5h
IPx3
English
| Français | Español | Portuguese