Flow Mini Instrucciones De Uso página 3

Speci cations
Smoke inlet
Mounting plate
Localization:
Early detection of re is most e ective when smoke
detectors are present in all rooms and spaces of the house.
Do not install this smoke detector in the point of the roof. If
the roof has an angle wider than 30 degrees and the total
height is 6 meters, we advise you to place the smoke
detector 30-50 cm from the point. If the angle is wider than
45 degrees, the smoke detector can be placed in the point.
The smoke detector should be placed at least 61cm from the
wall.
Place the smoke detector at least 50cm from a light source.
LED
Test / pause button
Fig.1
3-8
Remove the mounting plate and take out the small magnet;
the smoke detector is now activated.
Attention: the built-in Lithium battery cannot be replaced.
Under normal circumstances, it will last 10 years in stand-by
time.
In order to check whether the smoke detector is working,
you can press the test button. The LED will start blinking and
a "BEEP" sounds.
To turn o the smoke detector, put the little magnet back in
its place. In order to check whether the smoke detector is
turned o , you can press the test button. No "BEEP" will
sound.
4-8
Fig.2