P-Poping; Mounting The M1; Specifications - ICON M1 Manual Del Usuario

P-Poping

P-Poping is that annoying pop that you can get when the microphone diaphragm gets
a blast of air from a vocalist pronouncing words with the letter "P" included. There are
a few ways to deal with the problem including using an external pop filter. Some famous
engineers have relied on an old nylon stocking over a bent clothes hanger, which actually
works very well. For a cleaner solution, try ICON PF-01 pop filter. You can also try placing
the microphone slightly off axis (on a slight angle) from the vocalist. This can often solve
the problem without using an external pop filter.

Mounting the M1

Mount your M1 into the provided suspension
mount as the diagrams illustrated below.

Specifications

Acoustical operating principle
Directional pattern
Frequency range
Sensitivity
Rated Impedance
Min. load impedance
SPL
S/N ratio
Dynamic range
Power supply voltage
Current consumption
Weight (Microphone only)
(with suspension mount)
Dimensions
1
Pressure gradient transducer
Cardioid
20Hz – 20KHz
-37dBV/Pa
200 Ohms
1000 Ohms
144dB
78dB
128dB
48V +/-3V
4mA
0.25Kg (0.55lb)
0.43Kg (0.95lb)
46mm (dia.) x 157mm (L)
1.8" (dia.) x 6.2" (L)
2
5