NuTone 9297T Instrucciones De Instalación
  1. Manuales
  2. Marcas
  3. NuTone Manuales
  4. Calentadores
  5. 9297T
  6. Instrucciones de instalación
NuTone 9297T Instrucciones De Instalación

NuTone 9297T Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Ceiling Heater
MODEL: 9297T
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOW-
ING:
1. All electrical work must be done in accordance with local and/
or national electrical code as applicable. For safety, this prod-
uct must be grounded. If you are unfamiliar with methods of
installing electrical wiring, secure the services of a qualified
electrician.
2. Turn off power at service entrance before installing, wiring or
servicing this product.
3. This product is designed for horizontal ceiling installation only.
Do not mount this product on a wall or sloped ceiling.
4. Do not install heater closer than 12" to any adjacent vertical
surface.
5. To avoid electrical shock:
• Do not install unit in a tub or shower enclosure.
• Never place a switch where it can be reached from a tub or
shower.
6. Provide heater with a separate 20 amp (minimum), 120 VAC
circuit.
7. Do not connect heater to dimmer switch or speed control.
8. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power
unit.
9. Please read specification label on product for further informa-
tion and requirements.
INSTALLATION INSTRUCTIONS
READ & SAVE THESE INSTRUCTIONS!
PLAN THE INSTALLATION
This heater is intended to be used to supply supplemental heat
from a ceiling location in new or existing construction.
Choose a location where edge of heater will be at least 12" from
any adjacent vertical surface.
The heater can be operated using an ON/OFF switch, timer (Model
59W/59V 60-Minute or Model 61W/61V 15-Minute Timer), or ther-
mostat (Model 86W Line-Voltage Thermostat). Purchase the con-
trol separately.
Plan to supply the heater with proper line voltage and appropriate
power cable for its maximum wattage rating.
The heater attaches directly to a standard 3" or 4" ceiling electrical
box.
Refer to FIGURE 1
Follow these basic steps when installing this heater:
1. Mount electrical box in ceiling and attach power cable to it.
2. Connect wiring and fasten heater to electrical box.
3. Install grille.
CEILING
ELECTRICAL
BOX
DRYWALL
GRILLE SCREW
CEILING JOIST
HEATER
FIGURE 1
Tabla de contenido
loading

Manuales relacionados para NuTone 9297T

Resumen de contenidos para NuTone 9297T

  • Página 1 INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS! Ceiling Heater MODEL: 9297T IMPORTANT SAFETY INSTRUCTIONS PLAN THE INSTALLATION This heater is intended to be used to supply supplemental heat WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC from a ceiling location in new or existing construction.
  • Página 2 INSTALLATION Refer to FIGURE 2 1. Mount electrical box. Position electrical box flush or slightly re- cessed in ceiling and mount it securely. Refer to FIGURE 3 2. Connect wiring. Run electrical cable into box and secure with appropriate connector. Allow 6" of wire inside box. Refer to FIGURE 4 and FIGURE 5 3.
  • Página 3 HEATING ELEMENT FIGURE 8 CEILING BOX BLACK SWITCH BOX BLACK TOGGLE SWITCH, TIMER, OR THERMOSTAT 120 VAC LINE IN FIGURE 9 FIGURE 5 FIGURE 6 FIGURE 7...

  • Página 4: Parts List

    FOR A PARTICULAR PURPOSE. 06317-00 Installation Hook During this one-year period, NuTone will, at our option, repair or replace, without charge, any product or part which is found to be defective under normal use and service. THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS AND TUBES.

  • Página 5: Calentador De Cielo Raso

    INSTRUCCIONES DE INSTALACIÓN ¡LEA Y CONSERVE ESTAS INSTRUCCIONES! Calentador de Cielo Raso MODELO: 9297T INSTRUCCIONES DE PLANIFICACION DE LA INSTALACION SEGURIDAD IMPORTANTES Este calentador ha sido diseñado para proporcionar calefacción adicional desde el cielo raso en una construcción nueva o una ya existente.

  • Página 6: Instalacion

    INSTALACION Refiera a la FIGURA 2 1. Monte la caja eléctrica Coloque la caja eléctrica a nivel o un poco hacia adentro en el cielo raso y fíjela de forma segura. Refiera a la FIGURA 3 2. Conecte el cableado. Coloque el cable eléctrico en la caja y asegúrelo con el conector apropiado.
  • Página 7 ELEMENTO DE CALOR FIGURA 8 CAJA DE CIELO RASO NEGRO CAJA DEL INTERRUPTOR NEGRO TEMPORIZADOR DE INTERRUPTOR DE PALANCA LINEA DE ENTRADA ACODILLADA O FIGURA 9 120 VAC 60 HZ TERMOSTATO FIGURA 5 FIGURA 6 FIGURA 7...

  • Página 8: Lista De Piezas 9297T - R01

    Tornillo de cabeza ranurada 8-18 x 3/8 plg 06317-00 Gancho para instalación PARTICULAR. Durante el período de un año, y a su propio criterio, NuTone reparará o reemplazará, sin costo alguno, cualquier producto o pieza que se encuentre defectuosa bajo condiciones normales de servicio y uso.

Tabla de contenido