Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly and Instructions for Use
1. Unpack the product and check to make sure the adaptor is included (Fig 1).
2. This unit is powered by a AC adaptor, which is included or by four "AA" batteries, which
are not included.
3. Attach the AC adaptor jack to the base of the unit and insert the cord into a 120V
household outlet.
4. To install batteries, use a coin to turn the battery compartment door screw located on
the bottom of the product to the open position (Fig. 4). Open the battery compartment
door. Insert four "AA" batteries into the compartment according to the polarity direction
indicated. Close the compartment door, use a coin to turn door screw to the locked
position.
Listening to Nature Sounds
1. Power the unit on by turning the VOLUME knob in the clockwise direction.
2. Press the button of the sound you wish to listen to (Fig 2). The green POWER LED will
indicate the unit is on (Fig 3).
3. To adjust the volume, turn the VOLUME knob (Fig 3) to your desired level.
4. When finished listening to the sounds you may turn them off by turning the VOLUME
knob to the off position (Fig 3).
Note: When the unit is turned on it will always default to the last sound used.
Using the Auto-Timer
When the power is on and you are listening to a nature sound you may set a timer so the
unit will automatically turn off.
1. Toggle through the TIMER button (Fig 3) until the corresponding LED illuminates next
to the time of your choice, 15, 30 or 60 minutes. The unit will automatically shut off
after the selected time and the POWER LED (Fig 3) will remain lit showing you it is still
in timer mode. If you choose to listen to another timed sound press the timer button to
select a desired time. Or if you choose to listen to the sounds continuously, turn the unit
off and then back on.
Note: Do not select the TIMER button if you wish to listen to the sounds continuously.
4
Maintenance
To Store
You may leave the unit on display, or you can store it in its box or a cool, dry place.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner to clean.
Modifications not authorized by the manufacturer may void users authority to operate this device.
Battery Precautions:
1. Use AA alkaline batteries only. Do not use rechargeable batteries.
2. Replace all batteries at the same time.
3. Clean the battery contacts and the contacts of the device prior to battery installation with a dry cloth.
4. Ensure the batteries are installed correctly with regard to polarity (+ /–).
5. Remove batteries from the unit when it is not to be used for an extended period of time.
6. Remove depleted batteries from the unit promptly. Dispose of used batteries safely. Keep all batteries
away from children. Batteries are small objects and could be ingested. If swallowed, contact a
physician at once. Do not open batteries or dispose of in fire.
7. Do not mix old and new batteries.
8. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
5
Tabla de contenido
