Specific Safety Rules For Li-Ion Impact Screwdriver - Urrea AI1120 Manual Del Usuario

tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
USAGE AND CARE OF BATTERY TOOLS
1.- Recharge only with the charger specified by
the manufacurer. A charger other than the one
specified may cause a fire or damage to the bat-
tery.
2.- Use the tools only with battery packs spe-
cifically designed for that tool. The use of any
other battery pack may create a fire and dam-
age hazard.
3.- When the battery is not in use, keep away
from metal objects such as clips, coins, keys,
nails, screws, or any other small metal object
that can connect one terminal to another. Con-
necting one terminal to another can cause burns
and fires.
4.- Under severe conditions, liquid may spill
from the battery; avoid contact. If you acciden-
tally come in contact with the liquid, wash it off
with water immediately. If the liquid gets into
your eyes, get medical help. Spilled liquid from
the battery can cause irritation or burn.
SERVICE: tool service must be performed only
by qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
11
SPECIFIC SAFETY RULES FOR
LI-ION IMPACT SCREWDRIVER
ADDITIONAL SAFETY RULES FOR IMPACT
SCREWDRIVERS
• Do not put pressure on the drill to the extent
that it slows down the motor. For better results,
and to lengthen the life of the drill, allow the
drill bit to cut without pressure.
• Only use accessories that are in optimal condi-
tion.
• Hold the tool by its insulated gripping surfaces
when performing any operation where the tool
may contact hidden wiring or its own cord. Con-
tact with a "live" wire will make exposed metal
parts of the tool "live", and shock the operator.
• Check that there is sufficient clearance for the
drill bit under the workpiece before drilling.
• When starting the cordless screwdriver, let the
drill run for a few seconds before using it on
a workpiece. Watch for vibration or wobbling
that could indicate poor installation of an acces-
sory.
• Don't get distracted while operating, stop the
cordless screwdriver before turning your atten-
tion to other tasks.
• If possible, always use clamps or a vise to hold
the work.
• Ensure that the lighting is adequate to see the
operation.
• Keep the work area free of tripping hazards.
• Secure the material that is being drilled. Nev-
er hold it in your hand or across your hand or
across your legs.
• Do not use damaged or bowed drill bits.
• Keep hands away from rotating parts.
• Always wear safety goggles and a dust mask
when drilling, especially when drilling above
the level of your head.
• Watch out for flying sparks. Hold the tool so
that any sparks will fly away from the operator
and other persons. Keep all flammable materials
away when using this drill.
• Do not touch the workpiece immediately after
operation. It may be extremely hot, and could
burn the skin.
ADDITIONAL SAFETY RULES FOR CHARGER
• Before using the charger, read all the instruc-
tions and cautionary markings on the charger
and battery pack as well as the instructions on
the battery pack.
• Only charge your battery pack indoors as the
charger is designed for indoor use only.
DANGER: If the battery pack is cracked or