Power Connections - Bazooka MAA1500 Manual De Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

IMPORTANT!
Before making any connections, disconnect the boat's battery until the
installation is completed to avoid possible damage to the electrical system.
Connect the amplifier to the boat's battery (+).
At times, the amplifier will need to draw large levels of current that cannot be provided by
any circuit in the boat's fuse box. We recommended using an 4 to 8 gauge power wire for
your connections depending on the amplifier and length of the wire. Strip one end of the
wire to crimp on a barrier spade. Loosen the +12V screw terminal and insert the power
wire with the barrier spade and tighten. Use caution to make sure no stray wire stands
come in contact with surrounding terminals causing short circuits. Run the wire directly
to the positive terminal of the boat's battery. Make sure to use an in-line fuse within 12" of
the boat's battery to protect the electrical system and amplifier against short circuits
and/or power surges.
Connect the ground terminal of the amplifier to the boat's battery (-).
For the ground connection, we recommended using an 4 to 8 gauge power wire (Black) for
your connections depending on the amplifier and length of the wire. Strip one end of the
wire to crimp on a barrier spade. Loosen the "GND" screw terminal and insert the power
wire with the barrier spade and tighten. Use caution to make sure no stray wire stands
come in contact with surrounding terminals causing short circuits. Run the wire directly
to the negative terminal of the boat's battery
Connect the remote terminal of the amplifier to a switchable +12V source
This connection allows the amplifier to be turned on and off with the power control of the
radio. If the radio has a REMOTE output terminal, connect it to the amplifier's terminal
marked REMOTE (using a 16 gauge wire or heavier). Now when the radio is turned on, the
amplifier will automatically turn on. This connection can also be made to the radio's Power
Antenna wire.
P
OWER CONNECTIONS
PROTECT
SP
SP
SP
SP
POWER
SPEAKERS
IN-LINE POWER FUSE
IN-LINE POWER FUSE
MOUNTED WITHIN 12"
MOUNTED WITHIN 12"
FROM BATTERY RECOMMENDED
FROM BATTERY RECOMMENDED
(NOT PROVIDED)
(NOT PROVIDED)
RADIO'S REMOTE
RADIO'S REMOTE
TURN-ON OUTPUT
TURN-ON OUTPUT
94.7
94.7
FUSES
+12V
REM
20A
20A
20A
CHIL
7
GND
- -
+ +
BATTERY
BATTERY
+12V
+12V
.
Tabla de contenido
loading

Tabla de contenido