Specifications; Maintenance - TAD -M2500MK2 Manual De Instrucciones

SPECIFICATIONS

# Amplifier Section
Power output ...................................................500 W (2 channels simultaneously driven, 20 Hz to 20 kHz, T.H.D., 1.0 %, 4 Ω)
Rated distortion ...................................................................................................Less than 0.05 % (20 Hz to 20 kHz, 250 W, 4 Ω)
Signal-to-Noise Ratio (IHF, short circuited, A network) ......................................................................................112 dB or higher
Frequency response ......................................................................................................................................5 Hz to 50 kHz, –3 dB
Gain (Balance) ....................................................................................................................................................................... 29.5 dB
Input terminal (Sensitivity/ Impedance) .................................................................................................... 1.5 V/220 kΩ (Balance)
# Power section/miscellaneous
Power requirements
U.S. model ........................................................................................................................................................... AC 120 V, 60 Hz
Europe, Asia model ..................................................................................................................AC 220 V to 230 V, 50 Hz /60 Hz
Power consumption ................................................................................................................................................................ 250 W
Power consumption in standby .................................................................................................................................. 0.5 W or less
Dimensions ................................................................................................................. 440 mm (W) × 170 mm (H) × 467 mm (D)
Weight ......................................................................................................................................................................... 43 kg (94.8 lb)
# Accessories
Sheet ..................................................................................................................................................................................................3
Power cord
Operating Instructions (this document)
Note
' Specifications and the design are subject to possible modifications without notice, due to improvements.
To ensure long product life, avoid installing this
unit in the following locations:
• Locations exposed to direct sunlight.
• Humid or poorly ventilated areas.
• Areas of extreme temperatures.
• Areas with vibration.
• Dusty or smoky areas.
• Areas exposed to grease fumes, steam or heat
(such as a kitchen).
(17-5/16 in. (W) x 6-5/8 in. (H) x 18-3/8 in. (D))

Maintenance

Use a dry polishing cloth to wipe off dust and dirt. If the
surface is extremely dirty, wipe with a soft cloth dipped
in neutral cleanser diluted five to six times with water
and wrung out well. Do not use volatile chemicals such
as paint thinner or benzenes, as these may corrode
the surface of the panels. Do not use sprays such
as insecticides around the unit. If you plan on using
a chemical cleaning cloth, read the precautionary
statements of the chemical cleaning cloth before using.
© 2015 TECHNICAL AUDIO DEVICES LABORATORIES, INC.
0.75 V/47 kΩ (Unbalance)
All rights reserved.
15