Package Contents; Hardware Installation - D-Link DVS-310-1 Guía De Instalación Rápida

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DVS-310-1
Video Encoder
Mounting Bracket and
Screws

Hardware Installation

Note: The following installation instructions assume that an analog video camera is installed and providing a
signal. If necessary, please consult your camera manufacturer's user manual for information on how to set up
your analog camera.
Connect the Video Cable
Connect the video cable from the camera to the VIDEO IN port of the
video encoder.
Once the cable has been connected, rotate the BNC connector clockwise
so that the cable locks into place.
DVS-310-1
1-CH H.264 PoE VIDEO ENCODER
CD-ROM with Manual
and Setup Wizard
Note :
Using a power supply with a different voltage rating will
damage and void the warranty of this product.
Ethernet (CAT5 UTP)
Cable
2
12V Power Adapter