Tabla de contenido
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
17
4.
Install wall plate
using four lag bolts
plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
3
18
19
and four washers
. Tighten the lag bolts only until they are pulled firmly against the wall
3 in.
(75 mm)
7/32 in.
(5.5 mm)
4
17
18
19
11
Tabla de contenido
