Tabla de contenido
Idiomas disponibles
Idiomas disponibles
clog the polishing pad and you will have to clean it
more often.
•
Without turning the tool on, grasp the polisher and
pick it up as shown in Proper Hand Position. Keep
the tool away from your body and depress the trigger
switch. Make sure you have a firm grip on the polisher
and operate the tool freely without forced effort or
unnecessary pressure.
nOTE: The high speed rubbing action of the polishing
bonnet upon the surface of an automobile can build a static
charge on the metal portions of this tool. This can result in a
sensation of a very short mild electric shock when the metal
area of the tool is touched, and will be more noticeable
on days when the humidity is low. This is a harmless
phenomenon but you are invited to bring the tool to a
Mac Tools service center where it can be checked to assure
that no electrical malfunction is present.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Accessories
WARNING: Since accessories, other than those
offered by Mac Tools, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only Mac Tools
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact Mac Tools 505 North Cleveland
Avenue, Westerville, Ohio 43082, call 1-800-MAC-TOOLS
(1-800-622-8665) or visit our website: www.mactools.com.
Use only accessories having a maximum operating speed at
least as high as the highest "NO LOAD RPM" marked on the
tool's nameplate. This precaution applies to any accessory
on any tool.
ACCESSORIES CHART
Accessory
3" Backing pad
1/4" mandrel hook and loop for
polishing accessories
Wool bonnet
Wool for cutting compounds
White foam pad
Soft buffing for applying wax/
polish
Yellow foam pad
Medium buffing for cutting
compounds
2" Roloc backing
1/4" mandrel screw-in for quick
pad
change of sanding and surface
prep accessories
2" sanding discs
Grits of 40, 60, and 80 for course
(40, 60, 80 grit)
sanding applications
2" 'Scotch-Brite"
Aggresive action to remove debris
discs surface prep
and prep for sanding
discs
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a Mac Tools
factory service center or a Mac Tools authorized
service center. Always use identical replacement parts.
Register
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Three Year Limited Warranty
Mac Tools will repair, without charge, any defects due
to faulty materials or workmanship for three years from
the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information,
visit www.mactools.com or call 1-800-MAC-TOOLS
(1-800-622-8665). This warranty does not apply to
accessories or damage caused where repairs have been
made or attempted by others. This warranty gives you
specific legal rights and you may have other rights which
vary in certain states or provinces.
English
Purpose
11
Tabla de contenido
