Horton S Instrucciones De Servicio página 10

NOTE
Your System Sentry
The glove box Torx
ned with a 30 and 40 Torx
removal and installation of the 3/16 Allen head System Sentry
The 40 Torx
®
40 Torx System Sentry
®
has left hand threads.
Do not replace the System Sentry
ton Friction Disc is balanced and anything other than the Horton
System Sentry
6. Install the new System Sentry
7. Using the small brush supplied in the repair kit, apply an even
coating of spline lubricant (also supplied in the repair kit) to
both splined areas of the Piston Friction Disc and Hub.
8. Install the Piston Friction Disc.
9. Replace the Face Seal and tighten the Face Seal to 50 In. Lbs.
[5.7 Nm] torque.
NOTE
If the Face Seal is round (NOT HEX. SHAPE) it is considered an
obsolete part and a new Air Chamber, with a threaded Face Seal
must be used to replace it.
10. Lubricate the new O-ring and O-ring contact surfaces with the
fresh O-ring lubricant supplied in the kit; then, install the new
O-ring into the Air Chamber.
10
may have an Allen head or a Torx
®
head tool (part number 994365) was desig-
®
®
end will work in the removal and installation of the
or lock-up bolts. The System Sentry
®
will upset the balance and could void warranty.
®
end. The 30 Torx
WARNING
with a straight plug. The Pis-
®
.
®
head.
®
end will work in the
®
.
®
®