Description Of The Appliance; Assembly - Kompernaß KH 4077 Instrucciones De Uso

Description of the appliance

q
ON/OFF Switch
w
Floodlight lever
e
Halogen floodlight
r
Protective grill
t
Knurled screw
y
Crossbeam
u
Telescopic stand
i
Power cable
o
Knurled screw
a
Fixing ring
s
Distributor box
d Knurled screw
f
Fixing screw
g
Glass cover

Assembly

Danger of electrical shock
Never insert the plug into an electrical socket until
the appliance has been completely assembled.
Danger of burns
Only touch the halogen lamps when they are in a
switched-off and cooled-down condition. The halo-
gen lamps will get very hot. Never touch the light-
bulb with bare hands, always use a clean and dry
lint-free cloth.
Opening up the pedestal base
To set up the telescopic stand
o
knurled screw, . The pedestal base can now
be opened out to the floor.
Turn the knurled screw
u
, loosen the
o
until it is tight.
Assemble the protective grill r on to
the halogen spotlights e
Insert the lower pegs of the protective grill
into the recesses on the corners before the glass
g
covering .
Squeeze the protective grill
that the pegs on the other side of the protective
grill can be inserted into the recesses there.
Do the same with the second halogen spotlight
Mounting the halogen floodlights e
on the crossbeam.
Insert the knurled screw
through the hole in the bracket of the halogen
e
floodlight .
Insert the halogen floodlight
t
screw in the pre-drilled hole on the crossbe-
y
am . Ensure that the Stoppers are located be-
hind the halogen floodlights
Turn the knurled screw
Assembling the crossbeam on the
telescopic stand.
Insert the knurled screw
hole in the distributer box
hole in the crossbeam
Now assemble the crossbeam
s
butor box with the assistance of the knurled
d
screw on the telescopic stand
Turn the knurled screw
Adjusting the height of the Stand
Halogen Floodlight
Loosen the fixing ring
anti-clockwise direction.
Adjust the telescopic stand
height.
Retighten the fixing ring
kwise direction.
- 15 -
r
r
so far together
t
with the washer
e
with the knurled
e .
t
until it is tight.
d
first of all through the
s
, then through the
y
.
y
and the distri-
u
.
d
until it is tight.
a
by turning it in an
u
to the desired
a
by turning it in a clok-