EDM Product 07182 Instrucciones De Uso página 17

INSTRUCCIONES IMPORTANTES DE SEGURIDAD 07182-07183
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
P MODE (standby mode)
Before working on the heater, you must turn on the side switch. The screen is displayed as a picture, it
is in standby mode, it does not heat up, "P" appears on the screen.
Long press the MODE button to set the hours, long press the MIN button to set the minutes, long press
SET to set the day, see the picture.
S MODE (working mode)
Press SET to change the mode from standby mode to work mode, the screen shows the following
picture, S on the screen.
Press the button to regulate the high heater setting and low heat setting, it is the low heat setting
when displayed on the screen , it is the high setting when displayed on the screen , see the
picture below.
Press the UP or DOWN button to select the desired temperature from a range of 5ºC to 40ºC. The
temperature is displayed in 2-set numbers, the number on the left shows the current temperature, the
number on the right shows the setting temperature, see the picture below.
W MODE (weekly timer mode)
Press SET to change the mode from standby mode to work mode, the screen is shown as below pictu-
re, W shos on the screen.
Press the MODE button to choose the weekly schedule, for example: MONDAY TO FRIDAY, 2. MONDAY
TO SATURDAY, 3. FRIDAY, ..., see the picture below.
Press the UP button to set the start time, press the DOWN button to set the stop time. For example,
press the UP button at 9:00, it means that from 0:00 to 9:00, the heater continues to run. Then press
DOWN button to set stop time, if set to 12:00, it will stop at 12:00, and then press UP and DOWN again
until 24h all is set, it will show current time when finish the setup, see the picture below.