Monster SuperThin Guía Del Usuario Y Garantía página 20

Attaching Extension Adapters to Extend
VESA Pattern to 400x400
™
NOTE: Each adapter includes two threaded studs
and nuts. No additional hardware is required to attach
the adapter to the mount.
1)
To attach the adapter to the ends of Tilting V-Bars,
place the adapter in front of the Tilting V-Bar.
The adapter should be attached at the uppermost
slot at the top of each vertical adjustment bar
and the lowest two holes in the bottom of each
Tilting V-Bar.
2)
Using a ½" (13mm) wrench, attach the adapter
by tightening the two nuts through the back
of the Tilting V-Bar.
3)
Using a Phillips head screwdriver, affix the adapter's
head cap screws to the back of your TV
16